2005-2008 Yaris · Service Manual ENGINE

DISASSEMBLY

Removal / installation · Vehicles built from Nov 2006


1. REMOVE VALVE STEM CAP

  1. A150945
    Remove the 16 valve stem caps from the cylinder head.

    HINT:
    Arrange the removed parts in the correct order.


2. REMOVE INTAKE VALVE

  1. A150946E01
    Using SST and wooden blocks, compress and remove the 2 valve retainer locks.
    SST
    09202-70020   (09202-00010)

    HINT:
    Arrange the removed parts in the correct order.

  1. Remove the retainer, valve spring and valve.

    HINT:
    Arrange the removed parts in the correct order.


3. REMOVE EXHAUST VALVE

  1. A150947E01
    Using SST and wooden blocks, compress and remove the 2 valve retainer locks.
    SST
    09202-70020   (09202-00010)

    HINT:
    Arrange the removed parts in the correct order.

  1. Remove the retainer, valve spring and valve.

    HINT:
    Arrange the removed parts in the correct order.


4. REMOVE VALVE STEM OIL SEAL

  1. A150948
    Using needle-nose pliers, remove the oil seals.


5. REMOVE VALVE SPRING SEAT

  1. A150949
    Using compressed air and a magnetic finger, remove the valve spring seats by applying air onto them.


6. REMOVE NO. 1 STRAIGHT SCREW PLUG

  1. A150950
    Using a 10 mm straight hexagon wrench, remove the 3 screw plugs and 3 gaskets.

    NOTICE:
    If water leaks from the straight screw plug or the plug is corroded, replace it.

← COMPONENTS (from Nov 2006)INSPECTION (from Nov 2006) →