2005-2008 Yaris · Service Manual ENGINE

INSPECTION

Inspection · Vehicles built from Nov 2006


INSPECT OIL PUMP RELIEF VALVE

  1. A150985
    Check the relief valve.

    1. Coat the valve with engine oil, and then check that the valve falls smoothly into the valve hole under its own weight.
      If the valve does not fall smoothly, replace the relief valve. If necessary, replace the oil pump assembly.


INSPECT OIL PUMP ASSEMBLY

  1. A150987
    Check the side clearance.

    1. Using a feeler gauge and precision straightedge, measure the clearance between the rotors and precision straightedge.

      Standard clearance:
      0.085 to 0.135 mm (0.0034 to 0.0053 in.)

      Maximum clearance:
      0.16 mm (0.0063 in.)

      If the side clearance is greater than the maximum, replace the oil pump assembly.

  1. A150989
    Check the rotor tip clearance.

    1. Using a feeler gauge, measure the clearance between the drive and driven rotor tips.

      Standard tip clearance:
      0.08 to 0.16 mm (0.0032 to 0.0063 in.)

      Maximum tip clearance:
      0.35 mm (0.0138 in.)

      If the tip clearance is greater than the maximum, replace the oil pump assembly.

  1. A150988
    Check the rotor body clearance.

    1. Using a feeler gauge, measure the clearance between the driven rotor and the oil pump body.

      Standard body clearance:
      0.12 to 0.19 mm (0.0048 to 0.0074 in.)

      Maximum body clearance:
      0.325 mm (0.0128 in.)

      If the body clearance is greater than the maximum, replace the oil pump assembly.

← DISASSEMBLY (from Nov 2006)REASSEMBLY (from Nov 2006) →