Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › AIR CONDITIONING UNIT (for Hatchback)

AIR CONDITIONING UNIT (for Hatchback) > DISASSEMBLY

for Preparation Click here



1. REMOVE DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY


I101191E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the defroster damper control cable.



2. REMOVE AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY


I101192E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the air mix damper control cable.



3. REMOVE NO. 1 AIR DUCT


I101195
  1. Disengage the 3 claws and remove the air duct.



4. REMOVE NO. 2 AIR DUCT


I101196
  1. Disengage the 3 claws and remove the air duct.



5. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY


I101620
  1. Disengage the 3 claws and remove the clamp.



    I101201
  1. Remove the heater radiator unit from the air conditioner radiator assembly.



6. REMOVE COOLER EXPANSION VALVE


I101203
  1. Using a hexagon wrench 4, remove the 2 hexagon bolts and detach the cooler expansion valve.

  1. Remove the 2 O-rings from the No. 1 cooler evaporator.



7. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY


I101199
  1. Disengage the cooler thermistor connector.



    I101204
  1. Remove the 3 screws.

  1. Disengage the 4 claws and remove the heater case lower.



    I101205
  1. Remove the cooler evaporator.



8. REMOVE NO. 1 COOLER THERMISTOR


E110828E01
  1. Remove the cooler thermistor from the cooler evaporator.