HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS > GENERAL INFORMATION |
| TROUBLESHOOTING PROCEDURES |
| Procedure Type | Details | Troubleshooting Method |
| DTC Based Diagnosis | The diagnosis procedure is based on the DTC that is stored. | The malfunctioning part is identified based on the DTC detection conditions using a process of elimination. The possible trouble areas are eliminated one-by-one by use of the intelligent tester and inspection of related parts. |
| Symptom Based Diagnosis (No DTCs stored) | The diagnosis procedure is based on problem symptoms. | The malfunctioning part is identified based on the problem symptoms using a process of elimination. The possible trouble areas are eliminated one-by-one by use of the intelligent tester and inspection of related parts. |