Home › BRAKE › BRAKE CONTROL › ANTI-LOCK BRAKE SYSTEM (for Sedan)

ANTI-LOCK BRAKE SYSTEM (for Sedan) > DATA LIST / ACTIVE TEST

for Preparation Click here



DATA LIST

HINT:
By referring to the DATA LIST displayed on the intelligent tester, the value and status of parts such as switches, sensors and actuators can be read without removing any parts. Reading the DATA LIST as the first step of troubleshooting is one method of shortening diagnostic time.



    A107926E08
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Select the following menu items: Chassis / ABS/VSC/TRC / Data List.

    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Notes
    ABS Warning Light
    ABS warning light / ON or OFF
    ON: ABS warning light ON
    OFF: ABS warning light OFF
    -
    Brake Warning Light
    BRAKE warning light / ON or OFF
    ON: BRAKE warning light ON
    OFF: BRAKE warning light OFF
    -
    Stop Lamp SW
    Stop light switch / ON or OFF
    ON: Brake pedal depressed
    OFF: Brake pedal released
    -
    Parking Brake SW
    Parking brake switch / ON or OFF
    ON: Parking brake applied
    OFF: Parking brake released
    -
    Deceleration Sensor
    Deceleration sensor reading / min.: -25.11 m/s, max.: 24.91 m/s
    Approximately 0+-0.13 while stationary
    -
    Forward and Rearward G
    Forward and rearward G
    min.: -25.11 m/s2
    max.: 24.91 m/s2
    -
    FR Wheel Speed
    Wheel speed sensor (FR) reading : min.: 0 km/h (0 mph), max.: 326 km/h (202 mph)
    Actual wheel speed
    Similar to speed indicated on speedometer
    FL Wheel Speed
    Wheel speed sensor (FL) reading : min.: 0 km/h (0 mph), max.: 326 km/h (202 mph)
    Actual wheel speed
    Similar to speed indicated on speedometer
    RR Wheel Speed
    Wheel speed sensor (RR) reading : min.: 0 km/h (0 mph), max.: 326 km/h (202 mph)
    Actual wheel speed
    Similar to speed indicated on speedometer
    RL Wheel Speed
    Wheel speed sensor (RL) reading : min.: 0 km/h (0 mph), max.: 326 km/h (202 mph)
    Actual wheel speed
    Similar to speed indicated on speedometer
    Vehicle Speed
    Maximum speed sensor reading : min.: 0 km/h (0 mph), max.: 326 km/h (202 mph)
    Actual wheel speed
    Similar to speed indicated on speedometer
    FR Wheel Acceleration
    FR wheel acceleration / min.: -25.11 m/s2, max.: 24.91 m/s2
    min.: -200.84 m/s2
    max.: 199.27 m/s2
    -
    FL Wheel Acceleration
    FL wheel acceleration / min.: -25.11 m/s2, max.: 24.91 m/s2
    min.: -200.84 m/s2
    max.: 199.27 m/s2
    -
    RR Wheel Acceleration
    RR wheel acceleration / min.: -25.11 m/s2, max.: 24.91 m/s2
    min.: -200.84 m/s2
    max.: 199.27 m/s2
    -
    RL Wheel Acceleration
    RL wheel acceleration / min.: -25.11 m/s2, max.: 24.91 m/s2
    min.: -200.84 m/s2
    max.: 199.27 m/s2
    -
    FR Wheel ABS Ctrl Status
    FR wheel ABS control status / ON or OFF
    ON: During control
    -
    FL Wheel ABS Ctrl Status
    FL wheel ABS control status / ON or OFF
    ON: During control
    -
    RR Wheel ABS Ctrl Status
    RR wheel ABS control status / ON or OFF
    ON: During control
    -
    RL Wheel ABS Ctrl Status
    RL wheel ABS control status / ON or OFF
    ON: During control
    -
    Solenoid Relay
    Solenoid relay / ON or OFF
    ON: Solenoid relay ON
    OFF: Solenoid relay OFF
    -
    ECB Motor Relay
    ABS Motor relay / ON or OFF
    ON: Motor relay ON
    OFF: Motor relay OFF
    -
    ABS Solenoid (SFRH) (*1)
    ABS solenoid (SFRH) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    ABS Solenoid (SFRR) (*2)
    ABS solenoid (SFRR) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    ABS Solenoid (SFLH) (*3)
    ABS solenoid (SFLH) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    ABS Solenoid (SFLR) (*4)
    ABS solenoid (SFLR) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    ABS Solenoid (SRRH) (*5)
    ABS solenoid (SRRH) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    ABS Solenoid (SRRR) (*6)
    ABS solenoid (SRRR) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    ABS Solenoid (SRLH) (*7)
    ABS solenoid (SRLH) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    ABS Solenoid (SRLR) (*8)
    ABS solenoid (SRLR) / ON or OFF
    ON: Operates
    OFF: Does not operate
    -
    FR Speed Open
    FR speed sensor open detection / ERROR or NORMAL
    ERROR: Momentary interruption
    NORMAL: Normal
    -
    FL Speed Open
    FL speed sensor open detection / ERROR or NORMAL
    ERROR: Momentary interruption
    NORMAL: Normal
    -
    RR Speed Open
    RR speed sensor open detection / ERROR or NORMAL
    ERROR: Momentary interruption
    NORMAL: Normal
    -
    RL Speed Open
    RL speed sensor open detection / ERROR or NORMAL
    ERROR: Momentary interruption
    NORMAL: Normal
    -
    Number of DTC
    Number of recorded DTCs / min.: 0, max.: 255
    min.: 0
    max.: 255
    -

    HINT:
    1. *1: SFRH (S: Solenoid, F: Front, R: Right, H: Holding)
    2. *2: SFRR (S: Solenoid, F: Front, R: Right, R: Reduction)
    3. *3: SFLH (S: Solenoid, F: Front, L: Left, H: Holding)
    4. *4: SFLR (S: Solenoid, F: Front, L: Left, R: Reduction)
    5. *5: SRRH (S: Solenoid, R: Rear, R: Right, H: Holding)
    6. *6: SRRR (S: Solenoid, R: Rear, R: Right, R: Reduction)
    7. *7: SRLH (S: Solenoid, R: Rear, L: Left, H: Holding)
    8. *8: SRLR (S: Solenoid, R: Rear, L: Left, R: Reduction)


ACTIVE TEST

HINT:
Performing the ACTIVE TEST using the intelligent tester allows parts such as relays and actuators to be operated without removing any parts. Performing the ACTIVE TEST as the first step of troubleshooting is one method of shortening diagnostic time.
It is possible to display the DATA LIST during the ACTIVE TEST.



    A107926E08
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. By following the prompts on the tester, perform the ACTIVE TEST.

    HINT:
    1. The ignition switch must be turned ON to proceed to the ACTIVE TEST using the intelligent tester.
    2. The ACTIVE TESTs of the ABS solenoid, ABS motor relay, ABS warning light and BRAKE warning light are available when the vehicle is stopped.
    3. The motors stop automatically after 5 seconds of activation to prevent them from being damaged. When the motors are driven repeatedly, certain intervals are required.
    4. Each solenoid stops automatically after 2 seconds of activation to prevent them from being damaged, and can be operated again after a certain interval.
    5. Do not depress the brake pedal while only the pressure reduction solenoid valves are on.
    6. Do not drive 2 or more solenoids simultaneously except to operate the pressure holding solenoid valves and pressure reduction solenoid valves of each wheel.


    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    ABS Warning Lamp
    Turns ABS warning light
    ON or OFF
    Observe combination meter
    Brake Warning Lamp
    Turns BRAKE warning light
    ON or OFF
    Observe combination meter
    Solenoid Relay
    Turns ABS solenoid relay
    ON or OFF
    -
    Motor Relay
    Turns ABS motor relay
    ON or OFF
    Operation sound of motor can be heard
    ABS Solenoid (SRLR)
    Turns ABS solenoid (SRLR)
    ON or OFF
    Operation sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SRLH)
    Turns ABS solenoid (SRLH)
    ON or OFF
    Operation sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SRRR)
    Turns ABS solenoid (SRRR)
    ON or OFF
    Operation sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SRRH)
    Turns ABS solenoid (SRRH)
    ON or OFF
    Operation sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SFLR)
    Turns ABS solenoid (SFLR)
    ON or OFF
    Operation sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SFLH)
    Turns ABS solenoid (SFLH)
    ON or OFF
    Operation sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SFRR)
    Turns ABS solenoid (SFRR)
    ON or OFF
    Operation sound of solenoid (clicking sound) can be heard
    ABS Solenoid (SFRH)
    Turns ABS solenoid (SFRH)
    ON or OFF
    Operation sound of solenoid (clicking sound) can be heard