Home › BRAKE › BRAKE CONTROL › ANTI-LOCK BRAKE SYSTEM (for Sedan)

ANTI-LOCK BRAKE SYSTEM (for Sedan) > FAIL-SAFE CHART

for Preparation Click here



FAIL SAFE OPERATION
  1. If there is a problem with any sensor signals or actuator systems, the skid control ECU prohibits the power supply to the brake actuator.
    ABS control is prohibited, but EBD control continues as far as possible. If EBD control is impossible, the BRAKE warning light comes on to warn the driver (Click here).
  2. If system components have any malfunctions before starting control, the operation stops immediately. If system components have any malfunctions during control, the control stops gradually so as not to trigger a sudden change in vehicle conditions.
    If it is impossible to control the systems, the warning light comes on to inform the driver of malfunctions in the systems (Click here).

HINT:
  1. If the ABS system malfunctions, the brake system operates normally without the ABS system.
  2. If the brake actuator malfunctions, a gradual loss of brake performance is expected, and ABS system control is prohibited.


ABS and EBD system 
Malfunction Area
Fail-Safe Operation
ABS system
ABS control prohibited
EBD system
ABS and EBD control prohibited