FRONT SEAT SIDE AIRBAG ASSEMBLY > DISPOSAL |
![]() |
| 1. DISPOSE OF FRONT SEAT SIDE AIRBAG ASSEMBLY (WHEN INSTALLED IN VEHICLE) |
![]() |
Check the function of SST.
![]() |
Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.
![]() |
Press the SST activation switch, and check that the LED of the SST activation switch illuminates.
Disconnect SST from the battery.
Disconnect the cable from the negative battery terminal.
![]() |
Remove the connector clamp.
Disconnect the airbag connector, as shown in the illustration.
![]() |
Connect SST.
Connect the SST connector to the front seat side airbag.
![]() |
Move SST to at least 10 m (33 ft) away from the vehicle.
Close all doors and windows of the vehicle.
Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.
Deploy the airbag.
Check that no one is inside the vehicle or within a 10 m (33 ft) radius of the vehicle.
Press the SST activation switch and deploy the airbag.
| 2. DISPOSE OF FRONT SEAT SIDE AIRBAG ASSEMBLY (WHEN NOT INSTALLED IN VEHICLE) |
![]() |
Check the function of SST.
![]() |
Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.
![]() |
Press the SST activation switch, and check that the LED of the SST activation switch illuminates.
Disconnect SST from the battery.
Remove the front seat side airbag .
![]() |
Using a service-purpose wire harness for the vehicle, tie the front seat side airbag.
| Area | Measurement |
| A | 1.25 mm2 or more (0.0019 in.2 or more) |
![]() |
Install the 2 nuts onto the front seat side airbag.
Wind the wire harnesses around the stud bolts of the front seat side airbag, as shown in the illustration.
![]() |
Position the front seat side airbag inside the tire, as shown in the illustration.
| Area | Measurement |
| A | 185 mm (7.28 in.) |
| B | 360 mm (14.17 in.) |
Connect SST.
![]() |
Connect the SST connector to the front seat side airbag connector.
![]() |
Place the tires.
Place at least 2 tires under the tire to which the front seat side airbag is tied.
Place at least 2 tires over the tire to which the front seat side airbag is tied. The disc wheel should be installed onto the top tire.
![]() |
Tie the tires together with 2 wire harnesses.
![]() |
Install SST.
Connect the SST connector.
Deploy the airbag.
Connect the red clip of SST to the positive battery terminal and the black clip of SST to the negative battery terminal.
Check that no one is within a 10 m (33 ft) radius of the tire to which the front seat side airbag is tied.
Press the SST activation switch and deploy the airbag.
![]() |
Dispose of the front seat side airbag.
Remove the front seat side airbag from the tire.
Place the front seat side airbag in a plastic bag, tie it tightly and dispose of it according to local regulations.