HOOD (for Sedan) > ADJUSTMENT |

| 1. INSPECT HOOD |
Check that the clearance measurements are within the standard ranges.

| Area | Measurement | Area | Measurement |
| A | 2.35 to 6.35 mm (0.092 to 0.250 in.) | C | 2.0 to 5.0 mm (0.079 to 0.197 in.) |
| B | -2 to 2 mm (-0.079 to 0.079 in.) | - | - |
| 2. ADJUST HOOD |
![]() |
Loosen the hood side hinge bolts.
Move the hood to adjust the clearance to within the standard range.
Tighten the hood side hinge bolts after the adjustment.
![]() |
Adjust the height of the hood front end by turning the cushion rubber.
![]() |
Adjust the hood lock.
Loosen the 3 bolts.
Adjust the hood lock position so that the striker can enter it smoothly.
Tighten the 3 bolts after the adjustment.