REAR DOOR (for Hatchback with Power Window) > ADJUSTMENT |
![]() |
| 1. INSPECT REAR DOOR |
Check that the clearance measurements are within the standard ranges.

| Area | Measurement | Area | Measurement |
| A | 4.1 to 7.1 mm (0.161 to 0.280 in.) | G | 3.5 to 6.5mm (0.138 to 0.256 in.) |
| B | 2.5 to 5.5mm (0.098 to 0.217 in.) | H | 2.6 mm (0.102 in.) |
| C | -1.5 to 1.5mm (-0.059 to 0.059 in.) | I | 3.3 to 6.3mm (0.130 to 0.248 in.) |
| D | 2.5 to 5.5mm (0.098 to 0.217 in.) | J | -1.5 to 1.5mm (-0.059 to 0.059 in.) |
| E | 3.5 to 6.5mm (0.138 to 0.256 in.) | K | 3.3 to 6.3mm (0.130 to 0.248 in.) |
| F | 1.9 mm (0.075 in.) | L | -1.5 to 1.5mm (-0.059 to 0.059 in.) |
| 2. ADJUST REAR DOOR |
Disconnect the cable from the negative battery terminal.
Wait for at least 90 seconds after disconnecting the cable to prevent the airbag from working.
![]() |
Using SST, adjust the door horizontally and vertically by loosening the body side hinge bolts.
Tighten the body side hinge bolts after the adjustment.
![]() |
Adjust the door horizontally and vertically by loosening the door side hinge bolts.
Tighten the door side hinge bolts after the adjustment.
![]() |
Using "TORX" socket wrench T40, adjust the striker position by slightly loosening the striker mounting screws and hitting the striker with a plastic-faced hammer.
Using "TORX" socket wrench T40, tighten the striker mounting screws after the adjustment.
Connect the cable to the negative battery terminal.