FRONT BRAKE (for Hatchback) > REMOVAL |
| 1. REMOVE FRONT WHEEL |
| 2. DRAIN BRAKE FLUID |
| 3. DISCONNECT FRONT FLEXIBLE HOSE |
![]() |
Remove the union bolt and gasket and separate the flexible hose from the disc brake cylinder.
| 4. REMOVE DISC BRAKE CYLINDER ASSEMBLY |
![]() |
Fix the slide pin with a wrench, remove the 2 bolts and remove the disc brake cylinder.
| 5. REMOVE FRONT DISC BRAKE PAD KIT (PAD ONLY) |
![]() |
Remove the 2 disc brake pads from the disc brake cylinder mounting.
| 6. REMOVE FRONT ANTI SQUEAL SHIM KIT |
Remove the No. 1 anti squeal shim and No. 2 anti squeal shim from each brake pad.
| 7. REMOVE NO. 1 PAD WEAR INDICATOR PLATE |
Remove the indicator plate from each brake pad.
| 8. REMOVE FRONT DISC BRAKE PAD SUPPORT PLATE |
![]() |
Remove the 4 disc brake pad support plates from the disc brake cylinder mounting.
| 9. REMOVE FRONT DISC BRAKE CYLINDER SLIDE PIN |
![]() |
Remove the slide pin (upper) and slide pin (lower) from the disc brake cylinder mounting.
| 10. REMOVE FRONT DISC BRAKE CYLINDER SLIDE BUSH |
![]() |
Using a screwdriver with its tip wrapped in protective tape, remove the slide bush from the slide pin (lower).
| 11. REMOVE NO. 1 BUSH DUST BOOT |
![]() |
Remove the 2 dust boots from the disc brake cylinder mounting.
| 12. REMOVE FRONT DISC BRAKE CYLINDER MOUNTING |
![]() |
Remove the 2 bolts and remove the disc brake cylinder mounting from the steering knuckle.
| 13. REMOVE FRONT DISC |
![]() |
Place matchmarks on the disc and axle hub and remove the disc.