Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › HEATER BLOWER MOTOR RELAY (for Sedan)

HEATER BLOWER MOTOR RELAY (for Sedan) > INSPECTION

for Preparation Click here



1. INSPECT HEATER BLOWER MOTOR RELAY


I100430E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between each terminal.

      Standard resistance:
      Tester Connection
      Specified Condition
      3 - 4
      Below 1 Ω
      3 - 4
      10 kΩ or higher
      (Apply battery voltage to terminals 1 and 2)
      3 - 5
      10 kΩ or higher
      3 - 5
      Below 1 Ω
      (Apply battery voltage to terminals 1 and 2)

      If the result is not as specified, replace the relay.