Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY (for Sedan)

HEADLIGHT ASSEMBLY (for Sedan) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the LH side.
  3. Set the headlight leveling switch to 0 (zero) before conducting the procedure.



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


2. REMOVE FRONT BUMPER COVER


    B134799E01
  1. Apply protective tape, as shown in the illustration.



    B134803
  1. Remove the 7 screws and 3 bolts.

  1. Remove the 2 screw grommets.

  1. Remove the 6 clips.



    B134801
  1. w/ Fog Light:

    1. Disengage the 6 claws and remove the front bumper cover.

    2. Disconnect the 2 fog light connectors.



    B134800
  1. w/o Fog Light:

    1. Disengage the 6 claws and remove the front bumper cover.



    B134823
  1. Remove the 2 clips and the screw grommet.



3. REMOVE HEADLIGHT ASSEMBLY


    E127125
  1. Remove the 2 screws and the bolt.

  1. w/ Headlight leveling:
    Disconnect the 3 connectors, then remove the headlight.

  1. w/o Headlight leveling:
    Disconnect the 2 connectors, then remove the headlight.