FUEL PUMP > DISASSEMBLY |
| 1. REMOVE FUEL SENDER GAUGE ASSEMBLY |
![]() |
![]() |
Disconnect the fuel sender gauge connector.
![]() |
Release the lock by sliding the fuel sender gauge upward, as shown in the illustration.
| 2. REMOVE FUEL PUMP |
![]() |
Disconnect the connector of the fuel pump harness.
![]() |
Disconnect the fuel tube.
![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws, and remove the fuel filter and the fuel pump from the fuel sub-tank.
![]() |
Disengage the 2 claws and remove the fuel suction support.
![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws, and remove the suction filter with fuel pump from the fuel filter.
![]() |
Disconnect the fuel pump harness.
![]() |
Remove the O-ring and fuel pump spacer.