Home › BODY ELECTRICAL › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM

POWER DOOR LOCK CONTROL SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



READ DATA LIST

HINT:
Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Read the DATA LIST in accordance with the display on the tester.

    Main body ECU: 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    D Dor Cty SW
    Driver side door courtesy switch signal/ ON or OFF
    ON: Driver side door is open
    OFF: Driver side door is closed
    -
    D Lock Pos SW
    Driver side door lock position switch signal/ ON or OFF
    ON: Driver side door is unlocked
    OFF: Driver side door is closed
    -
    D/L SW-Lock
    Door manual lock switch signal/ ON or OFF
    ON: Door control switch (for front driver door side) is turned to lock position
    OFF: Door control switch (for front driver door side) is turned to unlock position
    -
    D/L SW-Unlock
    Door manual unlock switch signal/ ON or OFF
    ON: Door control switch (for front driver door side) is turned to unlock position
    OFF: Door control switch (for front driver door side) is turned to lock position
    -
    Dor Key SW-Lock
    Door key linked lock switch signal/ ON or OFF
    ON: Driver side door key cylinder is turned to lock position
    OFF: Driver side door key cylinder is turned to unlock position
    -
    Dor Key SW-ULck
    Door key linked unlock switch signal/ ON or OFF
    ON: Driver side door key cylinder is turned to unlock position
    OFF: Driver side door key cylinder is turned to lock position
    -
    P Dor Cty SW
    Passenger side door courtesyswitch signal/ ON or OFF
    ON: Passenger side door is open
    OFF: Passenger side door is closed
    -
    RR Dor Cty SW*2
    Rear door RH courtesy switch signal/ ON or OFF
    ON: Rear door RH is open
    OFF: Rear door RH is closed
    -
    RL Dor Cty SW*2
    Rear door RL courtesy switch signal/ ON or OFF
    ON: Rear door RL is open
    OFF: Rear door RL is closed
    -
    Back Dor Cty SW*1
    Back door courtesy switch signal/ ON or OFF
    ON: Back door is open
    OFF: Back door is closed
    -
    Key Unlk Wrn SW
    Unlock warning switch signal/ ON or OFF
    ON: Key is in ignition key cylinder
    OFF: No key is in ignition key cylinder
    -
    Comm D-Door Mtr
    Connection status between power window regulator motor assembly (driver door) and main body ECU
    OK/Stop
    OK: Connection
    Stop: No connection
    -
    Comm Double Lock
    Connection status between double door lock ECU and main body ECU
    OK/Stop
    OK: Connection
    Stop: No connection
    -
    *1: Hatchback
    *2: 5 Door and sedan


PERFORM ACTIVE TEST

HINT:
Performing the intelligent tester's ACTIVE TEST allows relays, VSVs, actuators and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time. The DATA LIST can be displayed during the ACTIVE TEST.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Perform the ACTIVE TEST in accordance with the display on the tester.

    Main body ECU: 
    Tester Display
    Test Part
    Control Range
    Door Lock
    Operate door lock motor LOCK/UNLOCK
    -
    Hazard
    Turn turn signal flasher relay ON / OFF
    -