Home › BODY ELECTRICAL › AUDIO / VISUAL › REAR PACKAGE TRAY SPEAKER (for Sedan)

REAR PACKAGE TRAY SPEAKER (for Sedan) > INSTALLATION

for Preparation Click here


HINT:
The procedure described below is for the RH side. Use the same procedure for both the RH and LH sides, unless otherwise specified.



1. INSTALL REAR SPEAKER ASSEMBLY


    B134975
  1. Install the rear speaker with the 4 bolts.

  1. Connect the speaker connector.



2. INSTALL PACKAGE TRAY TRIM PAD


    B134974
  1. Install the package tray trim pad.



3. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY


    B134912
  1. for 3 Point Type Rear Center Seat Belt:

    1. Engage the 5 claws and install the package tray trim.

    2. Install the 4 clips.



    B134913
  1. for 2 Point Type Rear Center Seat Belt:

    1. Engage the 5 claws and install the package tray trim.

    2. Install the 3 clips.



4. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY (w/o Rear Spoiler)


    E127792
  1. Connect the connector.

  1. Engage the 4 claws and install the high mounted stop light assembly.



5. INSTALL ROOF SIDE INNER GARNISH RH


    B134775E01
  1. w/ Curtain Shield Airbag:

    1. Install a new special clip and the clip onto the roof side inner garnish.

    2. Engage the 4 clips and the claw and install the roof side inner garnish.



    B134774
  1. w/o Curtain Shield Airbag:

    1. Engage the 4 clips and the claw and install the roof side inner garnish.



6. INSTALL ROOF SIDE INNER GARNISH LH

HINT:
Use the same procedure as for the RH side.



7. INSTALL REAR SEAT SIDE COVER RH


    B134776
  1. Engage the 2 clips and the 4 claws and install the rear seat side cover.



8. INSTALL REAR SEAT SIDE COVER LH

HINT:
Use the same procedure as for the RH side.



9. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH


    B138636
  1. Install the rear door opening trim weatherstrip.



10. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

HINT:
Use the same procedure as for the RH side.



11. INSTALL REAR DOOR SCUFF PLATE RH


    B134771
  1. Engage the 7 claws and install the rear door scuff plate.



12. INSTALL REAR DOOR SCUFF PLATE LH

HINT:
Use the same procedure as for the RH side.



13. INSTALL LUGGAGE COMPARTMENT TRIM INNER PAD (for 60/40 Split Seat Type)


B136275
  1. Install the luggage compartment trim inner pad.



14. INSTALL SPARE WHEEL COVER ASSEMBLY (for 60/40 Split Seat Type)


B136270
  1. Install the spare wheel cover.



15. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (for 60/40 Split Seat Type)


B136269
  1. Install the luggage compartment floor mat.



16. INSTALL REAR SEATBACK ASSEMBLY RH (for 60/40 Split Seat Type)


    B134945E01
  1. Insert the 2 hooks into the rear seatback frame hole and install the rear seatback tightening the 2 bolts in the sequence shown in the illustration.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }



    B134944
  1. Install the rear seatback cover with the 2 clips.

  1. Pull up the rear seatback.



    B134943
  1. Install the rear seat outer belt into the rear seat shoulder belt guide.

  1. for 3 Point Type Rear Seat Belt:

    1. Install the rear center seat outer belt into the rear center seat shoulder belt guide.



17. INSTALL REAR SEATBACK ASSEMBLY LH (for 60/40 Split Seat Type)


    B134926E01
  1. Insert the 2 hooks into the rear seatback frame hole and install the rear seatback tightening the 2 bolts in the sequence shown in the illustration.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }



    B134925
  1. Install the rear seatback cover with the 2 clips.

  1. Pull up the rear seatback.



    B134924
  1. Install the rear seat outer belt into the rear seat shoulder belt guide.



18. INSTALL REAR SEATBACK ASSEMBLY (for Fixed Seat Type)


    B134981
  1. Engage the 3 hooks and install the rear seatback.

  1. Tighten the 3 bolts.

    Torque:
    7.9 N*m{ 80 kgf*cm , 70 in.*lbf }



    B138450E02
  1. Install the rear seat outer belt into the rear seat shoulder belt guide.

    HINT:
    Use the same procedure for both sides.

  1. for 3 Point Type Rear Center Seat belt:

    1. Install the rear center seat outer belt into the rear center seat shoulder belt guide.



19. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY


    B134923
  1. Pass the rear seat inner belt through the rear seat cushion slit.

  1. Engage the 3 hooks and install the rear seat cushion cover pad.

    NOTICE:
    Make sure that the 2 rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.



20. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }