SPIRAL CABLE (for Hatchback) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE STEERING PAD (w/o Steering Pad Switch) |
![]() |
Using "TORX" socket wrench T30, loosen the 2 bolts completely.
Pull the steering pad toward you.
![]() |
Using a thin-bladed screwdriver, release the locking button.
| *1 | Locking Button |
Using a thin-bladed screwdriver, detach the airbag connector.
Detach the horn connector.
| 3. REMOVE STEERING PAD (w/ Steering Pad Switch) |
![]() |
Using "TORX" socket wrench T30, loosen the 2 bolts completely.
Pull the steering pad toward you.
![]() |
Using a thin-bladed screwdriver, release the locking button.
| *1 | Locking Button |
Using a thin-bladed screwdriver, detach the airbag connector.
Detach the horn connector.
| 4. REMOVE STEERING WHEEL ASSEMBLY |
![]() |
Remove the nut and place matchmarks on the steering wheel assembly and steering column assembly.
| *a | Matchmark |
![]() |
Using SST, remove the steering wheel assembly.
| 5. REMOVE STEERING COLUMN COVER |
![]() |
Remove the 3 screws.
Disengage the 2 claws and remove the steering column cover (lower).
Disengage the 2 claws and remove the steering column cover (upper).
| 6. REMOVE SPIRAL CABLE (w/o VSC) |
![]() |
| *1 | Slider |
Detach the horn connector.
Slide the slider and detach the airbag connector.
![]() |
Disengage the 3 claws and remove the spiral cable.
| 7. REMOVE SPIRAL CABLE (w/ VSC) |
![]() |
| *1 | Slider |
Detach the horn connector.
Slide the slider and detach the airbag connector.
Detach the steering sensor connector.
![]() |
Disengage the 3 claws and remove the spiral cable.
| 8. REMOVE STEERING SENSOR (w/ VSC) |
![]() |
Disengage the 6 claws, and remove the steering sensor from the spiral cable.