CENTER AIRBAG SENSOR ASSEMBLY (for Sedan) > REMOVAL |
| 1. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER |
![]() |
Disengage the 2 claws and 2 clips and remove the instrument panel finish panel lower center.
| 2. REMOVE INSTRUMENT PANEL FINISH PANEL END LH |
![]() |
Disengage the 6 claws and 3 clips and remove the instrument panel finish panel end LH.
| 3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) |
![]() |
Remove the shift lever knob.
| 4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Shift the shift lever into the N position.
Disengage the 5 clips and the claw and remove the upper console panel.
| 5. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
![]() |
Disengage the 3 clips and 3 claws.
Disconnect the connector and remove the console upper rear panel.
| 6. REMOVE CONSOLE BOX CARPET |
![]() |
Remove the console box carpet.
| 7. REMOVE REAR CONSOLE BOX ASSEMBLY |
![]() |
Disconnect the clamp.
Remove the 2 bolts and 2 screws.
Disengage the 4 claws and remove the rear console box.
| 8. REMOVE INSTRUMENT PAD LOWER LH |
![]() |
Remove screw <I>.
Disengage the claw and 3 clips and remove the instrument panel pad lower.
| 9. REMOVE CENTER AIRBAG SENSOR ASSEMBLY |
![]() |
Pull the lever down and detach the connector holder.
![]() |
Remove the 3 bolts and remove the airbag sensor.