FRONT WIPER MOTOR (for Hatchback) > INSPECTION |
| 1. INSPECT FRONT WIPER MOTOR (for LHD) |
![]() |
Check the LO operation.
Connect the positive battery (+) lead to terminal 5 (+1) of the connector and the negative battery (-) lead to terminal 4 (E), then check that the motor operates at low speed (LO).
Check the HI operation.
Connect the positive battery (+) lead to terminal 3 (+2) of the connector and the negative battery (-) lead to terminal 4 (E), then check that the motor operates at high speed (HI).
Check the automatic stop operation.
Connect the positive battery (+) lead to terminal 5 (+1) of the connector and the negative battery (-) lead to terminal 4 (E). With the motor operating at low speed (LO), disconnect terminal 5 (+1) to stop the wiper motor operation at any position other than the automatic stop position.
Using SST, connect terminals 1 (S) and 5 (+1). Connect the positive battery (+) lead to terminal 2 (B) of the connector to restart the motor operation at low speed (LO).
![]() |
Check that the motor stops automatically at the automatic stop position.
| 2. INSPECT FRONT WIPER MOTOR (for RHD) |
![]() |
Check the LO operation.
Connect the positive battery (+) lead to terminal 1 (+1) of the connector and the negative battery (-) lead to terminal 5 (E), then check that the motor operates at low speed (LO).
Check the HI operation.
Connect the positive battery (+) lead to terminal 4 (+2) of the connector and the negative battery (-) lead to terminal 5 (E), then check that the motor operates at high speed (HI).
Check the automatic stop operation.
Connect the positive battery (+) lead to terminal 1 (+1) of the connector and the negative battery (-) lead to terminal 5 (E). With the motor operating at low speed (LO), disconnect terminal 1 (+1) to stop the wiper motor operation at any position other than the automatic stop position.
Using SST, connect terminals 3 (S) and 1 (+1). Connect the positive battery (+) lead to terminal 2 (B) of the connector to restart the motor operation at low speed (LO).
![]() |
Check that the motor stops automatically at the automatic stop position.