IGNITION SWITCH > INSTALLATION |
| 1. INSTALL IGNITION OR STARTER SWITCH ASSEMBLY |
![]() |
Engage the 2 claws and install the ignition or starter switch assembly.
Connect the connector.
| 2. INSTALL STEERING COLUMN COVER |
![]() |
Install the screw indicated in the illustration.
![]() |
Turn the steering wheel to the left and install the screw indicated in the illustration.
![]() |
Turn the steering wheel to the right, and install the screw indicated in the illustration.
| 3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |