IGNITION SWITCH > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE STEERING COLUMN COVER |
![]() |
Turn the steering wheel to the right and remove the screw indicated in the illustration.
![]() |
Turn the steering wheel to the left and remove the screw indicated in the illustration.
![]() |
Remove the screw indicated in the illustration and remove the steering column cover.
| 3. REMOVE IGNITION OR STARTER SWITCH ASSEMBLY |
![]() |
Disconnect the connector.
Disengage the 2 claws and remove the ignition or starter switch assembly.