IGNITION SWITCH > INSPECTION |
| 1. INSPECT IGNITION OR STARTER SWITCH ASSEMBLY |
![]() |
Check the resistance.
Using an ohmmeter, measure the resistance between the terminals.
| Condition | Tester Connection | Standard |
| LOCK | Between all terminals | 10 kΩ or higher |
| ACC | 2-4 | Below 1 Ω |
| ON | 1-2-4 | Below 1 Ω |
| 5-6 | ||
| START | 1-3-4 | Below 1 Ω |
| 5-6-7 |