Home › ENGINE · 2NZ-FE › STARTING › IGNITION SWITCH

IGNITION SWITCH > INSPECTION

for Preparation Click here



1. INSPECT IGNITION OR STARTER SWITCH ASSEMBLY


    A119190E01
  1. Check the resistance.

    1. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Condition
      Tester Connection
      Standard
      LOCK
      Between all terminals
      10 kΩ or higher
      ACC
      2-4
      Below 1 Ω
      ON
      1-2-4
      Below 1 Ω
      5-6
      START
      1-3-4
      Below 1 Ω
      5-6-7