Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER UNIT (for Sedan)

BLOWER UNIT (for Sedan) > DISASSEMBLY

for Preparation Click here



1. REMOVE NO. 1 AIR DUCT SUB-ASSEMBLY


I102600
  1. Disengage the 2 claws and remove the air duct.



2. REMOVE AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY


I101207
  1. Disengage the 3 claws and remove the air inlet damper control cable.



3. REMOVE BLOWER MOTOR


I101208
  1. Remove the 3 screws and the blower motor.



4. REMOVE BLOWER RESISTOR


I101599
  1. Remove the 2 screws and the blower resistor.



5. REMOVE AIR FILTER CASE


I101211E01
  1. Pinch portion A to disengage the claw and remove the air filter case.