Home › RESTRAINTS › SUPPLEMENTAL RESTRAINT SYSTEM › AIRBAG SYSTEM

AIRBAG SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here


HINT:
By accessing the DATA LIST displayed on the intelligent tester, you can perform functions such as reading the values of switches and sensors without removing any parts. Reading the DATA LIST is the first step of troubleshooting and is one method of shortening diagnostic time.


DATA LIST FOR CENTER AIRBAG SENSOR ASSEMBLY
  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON and turn the tester on.

  3. Following the display on the tester screen, select the DATA LIST.

  4. Check the condition by referring to the table below.

    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    DISPLAY TYPE
    Display type identification information/
    LR: Display indicated by LH/RH
    DP: Display indicated by Driver/Passenger
    DP
    -
    PAST CODES
    Number of past DTCs/
    Min.: 0, Max.: 255
    0
    -