AIR CONDITIONING PANEL (for Hatchback) > INSTALLATION |
| 1. CONNECT AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY |
![]() |
Engage the 2 claws and connect the air inlet damper control cable.
| 2. CONNECT DEFROSTER DAMPER CONTROL CABLE SUB-ASSEMBLY |
![]() |
Engage the 2 claws and connect the defroster damper control cable.
| 3. CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY |
![]() |
Engage the 2 claws and connect the air mix control cable clamp.
Connect the defroster damper control cable to the clamp.
| 4. INSTALL AIR CONDITIONING PANEL ASSEMBLY |
![]() |
Connect the 3 connectors and the clamp.
![]() |
Engage the 3 clips and 2 claws and install the air conditioning panel.
| 5. INSTALL INSTRUMENT CLUSTER FINISH PANEL CENTER SUB-ASSEMBLY (Except CD Player) |
![]() |
Engage the 4 clips and 2 claws and install the instrument cluster finish panel center.
| 6. INSTALL RADIO RECEIVER ASSEMBLY (w/ CD Player) |
![]() |
Connect the connectors.
Engage the 4 clips and 2 claws and install the radio receiver.
Install the 4 screws.
| 7. INSTALL INSTRUMENT CLUSTER FINISH PANEL NO.1 |
![]() |
Fit the 3 A claws of the instrument cluster finish panel into the upper instrument cluster finish panel center.
![]() |
Engage the 4 claws and 5 clips and install the instrument cluster finish panel.
| 8. INSTALL INSTRUMENT PANEL FINISH PANEL END RH |
![]() |
with CD player
Connect the connector.
Engage the 4 claws and 3 clips and install the instrument panel finish panel end RH.
![]() |
Except CD player
Connect the connector.
Engage the 5 claws and 3 clips and install the instrument panel finish panel end RH.
| 9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH |
![]() |
with CD player
Connect the connector.
Engage the 4 claws and 3 clips and install the instrument panel finish panel end LH.
![]() |
Except CD player
Connect the connector.
Engage the 5 claws and 3 clips and install the instrument panel finish panel end LH.