Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM

AUDIO AND VISUAL SYSTEM > Cassette Tape cannot be Ejected

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK OPERATION
  1. Press the cassette tape EJECT switch of the radio receiver for 2 seconds or more and check that the cassette tape is ejected.

    OK:
    Cassette tape is ejected.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK


2.CHECK CASSETTE TAPE
  1. Check that the ejected cassette tape does not have a peeling label, cassette body deformation or other problems.

    OK:
    No problems with cassette tape.



NG
CASSETTE TAPE IS FAULTY
OK


3.REPLACE CASSETTE TAPE
  1. Replace the cassette tape with a normal one and check if the same problem occurs again.

    OK:
    Malfunction disappears.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

CASSETTE TAPE IS FAULTY