Home › BODY ELECTRICAL › AUDIO / VISUAL › STEERING PAD SWITCH (for Hatchback)

STEERING PAD SWITCH (for Hatchback) > INSTALLATION

for Preparation Click here



1. INSTALL STEERING PAD SWITCH LH


    B208609
  1. Engage the 3 claws.

  1. Install the steering pad switch LH with the screw.

  1. Connect the connector.



2. INSTALL STEERING PAD SWITCH ASSEMBLY (w/ Microphone)


B208610
  1. Engage the 6 claws.

  1. Install the steering pad switch assembly with the 2 screws.

  1. Connect the connector.



3. INSTALL STEERING PAD


C117200E01
  1. Connect the horn terminal.

  1. Connect the airbag connector.

    NOTICE:
    Securely lock the locking button.



    C121184
  1. Install the steering pad.

  1. Using "TORX" socket wrench T30, tighten the 2 bolts.

    Torque:
    8.8 N*m{ 90 kgf*cm , 78 in.*lbf }

    NOTICE:
    Tighten the 2 bolts while holding the steering pad to prevent it moving upward.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



5. INSPECT SRS WARNING LIGHT