Home › BODY ELECTRICAL › AUDIO / VISUAL › STEERING PAD SWITCH (for Sedan)

STEERING PAD SWITCH (for Sedan) > REMOVAL

for Preparation Click here


CAUTION:
Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing (Click here).



1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.



2. REMOVE STEERING PAD ASSEMBLY


C139082
  1. Using "TORX" socket wrench T30, loosen the 2 bolts completely.

  1. Pull the steering pad toward you.



    C139084E01
  1. Using a thin-bladed screwdriver, release the locking button.

  1. Using a thin-bladed screwdriver, disconnect the 2 connectors.

  1. Detach the horn terminal.



3. REMOVE STEERING PAD SWITCH LH


    E223361
  1. Disconnect the connector.

  1. Remove the screw.

  1. Disengage the 2 claws and the pin.

  1. Remove the steering pad switch LH.