Home › BODY ELECTRICAL › AUDIO / VISUAL › STEERING PAD SWITCH (for Hatchback)

STEERING PAD SWITCH (for Hatchback) > INSPECTION

for Preparation Click here



1. INSPECT STEERING PAD SWITCH LH


  1. Measure the resistance.


    E107763E01


    Standard Resistance:

    Tester connection
    Switch Condition
    Specified condition
    10 (AU1) - 8 (EAU)
    All switches released
    100 kΩ
    10 (AU1) - 8 (EAU)
    SEEK+ switch: pushed in
    Below 2.5 Ω
    10 (AU1) - 8 (EAU)
    SEEK- switch: pushed in
    0.3 kΩ
    10 (AU1) - 8 (EAU)
    VOL+ switch: pushed in
    1 kΩ
    10 (AU1) - 8 (EAU)
    VOL- switch: pushed in
    3.1 kΩ
    9 (AU2) - 8 (EAU)
    All switches released
    100 kΩ
    9 (AU2) - 8 (EAU)
    MODE switch: pushed in
    Below 2.5 Ω

    If the result is not as specified, replace the steering pad switch LH.



2. INSPECT STEERING PAD SWITCH ASSEMBLY (w/ Microphone)


  1. Measure the resistance.


    E107145E01


    Standard Resistance:

    Tester connection
    Switch Condition
    Specified condition
    10 (AU1) - 8 (EAU)
    All switches released
    100 kΩ
    10 (AU1) - 8 (EAU)
    SEEK+ switch: pushed in
    Below 2.5 Ω
    10 (AU1) - 8 (EAU)
    SEEK- switch: pushed in
    0.3 kΩ
    10 (AU1) - 8 (EAU)
    VOL+ switch: pushed in
    1 kΩ
    10 (AU1) - 8 (EAU)
    VOL- switch: pushed in
    3.1 kΩ
    9 (AU2) - 8 (EAU)
    All switches released
    100 kΩ
    9 (AU2) - 8 (EAU)
    MODE switch: pushed in
    Below 2.5 Ω
    9 (AU2) - 8 (EAU)
    ON Hook switch: pushed in
    0.3 kΩ
    9 (AU2) - 8 (EAU)
    OFF Hook switch: pushed in
    1 kΩ
    9 (AU2) - 8 (EAU)
    Voice switch: pushed in
    3.1 kΩ

    If the result is not as specified, replace the steering pad switch assembly.