Home › BODY ELECTRICAL › AUDIO / VISUAL › STEERING PAD SWITCH (for Sedan)

STEERING PAD SWITCH (for Sedan) > INSPECTION

for Preparation Click here



1. INSPECT STEERING PAD SWITCH LH


  1. Check the resistance of the steering pad switch LH.


    E154239E02


    Text in Illustration 
    *1
    SEEK Switch
    *2
    VOL Switch
    *3
    MODE Switch
    -
    -
    *a
    Component without harness connected
    (Steering Pad Switch LH)
    -
    -

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:

      Tester Connection
      Switch Condition
      Specified Condition
      10 (AU1) - 8 (EAU)
      All switches released
      95 to 105 kΩ
      9 (AU2) - 8 (EAU)
      All switches released
      95 to 105 kΩ
      10 (AU1) - 8 (EAU)
      VOL+ switch: pushed in
      950 to 1050 Ω
      9 (AU2) - 8 (EAU)
      VOL+ switch: pushed in
      95 to 105 kΩ
      10 (AU1) - 8 (EAU)
      VOL- switch: pushed in
      2955 to 3265 Ω
      9 (AU2) - 8 (EAU)
      VOL- switch: pushed in
      95 to 105 kΩ
      10 (AU1) - 8 (EAU)
      SEEK+ switch: pushed in
      Below 2.5 Ω
      9 (AU2) - 8 (EAU)
      SEEK+ switch: pushed in
      95 to 105 kΩ
      10 (AU1) - 8 (EAU)
      SEEK- switch: pushed in
      313 to 345 Ω
      9 (AU2) - 8 (EAU)
      SEEK- switch: pushed in
      95 to 105 kΩ
      10 (AU1) - 8 (EAU)
      MODE switch: pushed in
      95 to 105 kΩ
      9 (AU2) - 8 (EAU)
      MODE switch: pushed in
      Below 2.5 Ω

      If the result is not as specified, replace the steering pad switch LH.