Home › BODY ELECTRICAL › AUDIO / VISUAL › AMPLIFIER ANTENNA (for Sedan)

AMPLIFIER ANTENNA (for Sedan) > INSTALLATION

for Preparation Click here



1. INSTALL AMPLIFIER ANTENNA ASSEMBLY


    B134978
  1. Insert the hook into the body hole and install the amplifier antenna with the bolt.

  1. Engage the clamp.

  1. Connect the 2 amplifier antenna connectors.

  1. Connect the antenna connector.



2. INSTALL ROOF SIDE INNER GARNISH


    B134775E01
  1. w/ Curtain Shield Airbag:

    1. Install a new special clip and the clip onto the roof side inner garnish.

    2. Engage the 4 clips and the claw and install the roof side inner garnish.



    B134774
  1. w/o Curtain Shield Airbag:

    1. Engage the 4 clips and the claw and install the roof side inner garnish.



3. INSTALL REAR SEAT SIDE COVER


    B134776
  1. Engage the 2 clips and the 4 claws and install the rear seat side cover.



4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP


    B134773E01
  1. Align the location mark with the paint mark first, and install the rear door opening trim weatherstrip, as shown in the illustration.

    Paint mark:
    Area
    Color
    RH side
    Green
    LH side
    Red



5. INSTALL REAR DOOR SCUFF PLATE


    B134771
  1. Engage the 7 claws and install the rear door scuff plate.



6. INSTALL LUGGAGE COMPARTMENT TRIM INNER PAD (for 60/40 Split Seat Type)


B136275
  1. Install the luggage compartment trim inner pad.



7. INSTALL SPARE WHEEL COVER ASSEMBLY (for 60/40 Split Seat Type)


B136270
  1. Install the spare wheel cover.



8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT (for 60/40 Split Seat Type)


B136269
  1. Install the luggage compartment floor mat.



9. INSTALL REAR SEATBACK ASSEMBLY
  1. for 60/40 Split Seat Type:

    1. Install the rear seatback assembly .

  1. for Fixed Seat Type:

    1. Install the rear seatback assembly .



10. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY
  1. for 60/40 Split Seat Type:

    1. Install the rear seat cushion cover pad sub-assembly .

  1. for Fixed Seat Type:

    1. Install the rear seat cushion cover pad sub-assembly .



11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }