Home › TRANSMISSION ยท U441E AUTOMATIC TRANSAXLE › SPEED SENSOR (for Sedan)

SPEED SENSOR (for Sedan) > INSPECTION

for Preparation Click here



1. INSPECT SPEEDOMETER SENSOR


    C117095E02
  1. Connect the positive (+) lead from the battery to terminal 1 (IG+) and the negative (-) lead to terminal 2 (SE).

  1. Connect the positive (+) lead from the tester to terminal 3 (SI) and the negative (-) lead to terminal 2 (SE).

  1. Rotate the shaft.

  1. Check that the voltage output varies between 0 V and 11 V between terminals 2 (SE) and 3 (SI).

    HINT:
    The voltage output oscillates more than 4 times every revolution of the speed sensor shaft.
    If the operation is not as specified, replace the sensor.