Home › TRANSMISSION ยท U441E AUTOMATIC TRANSAXLE › TRANSMISSION REVOLUTION SENSOR

TRANSMISSION REVOLUTION SENSOR > REMOVAL

for Preparation Click here



1. REMOVE BATTERY
  1. Disconnect the cable from the battery terminal.

  1. Loosen the nut and remove the battery clamp.

  1. Remove the battery.



2. REMOVE BATTERY TRAY


3. REMOVE BATTERY CARRIER


A117309
  1. Separate the wire harness clamp from the battery carrier.

  1. Remove the 5 bolts and remove the battery carrier.



4. REMOVE TRANSMISSION REVOLUTION SENSOR


C107787
  1. Disconnect the transmission revolution sensor connector.

  1. Remove the bolt and transmission revolution sensor.



    C117099
  1. Remove the O-ring from the transmission revolution sensor.