Home › TRANSMISSION · U441E AUTOMATIC TRANSAXLE › PARK / NEUTRAL POSITION SWITCH

PARK / NEUTRAL POSITION SWITCH > INSPECTION

for Preparation Click here



1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


C110340E12
  1. Disconnect the park/neutral position switch connector.

  1. Measure the resistance with the shift lever in each position.

    Standard resistance:
    Shift Position
    Tester Connection
    Specified Condition
    P
    2 - 6 and 4 - 5
    Below 1 Ω
    Except P
    ↑
    10 kΩ or higher
    R
    2 - 1
    Below 1 Ω
    Except R
    ↑
    10 kΩ or higher
    N
    2 - 9 and 4 - 5
    Below 1 Ω
    Except N
    ↑
    10 kΩ or higher
    D and 3
    2 - 7
    Below 1 Ω
    Except D and 3
    ↑
    10 kΩ or higher
    2
    2 - 3
    Below 1 Ω
    Except 2
    ↑
    10 kΩ or higher
    L
    2 - 8
    Below 1 Ω
    Except L
    ↑
    10 kΩ or higher