PARK / NEUTRAL POSITION SWITCH > INSPECTION |
| 1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY |
![]() |
Disconnect the park/neutral position switch connector.
Measure the resistance with the shift lever in each position.
| Shift Position | Tester Connection | Specified Condition |
| P | 2 - 6 and 4 - 5 | Below 1 Ω |
| Except P | ↑ | 10 kΩ or higher |
| R | 2 - 1 | Below 1 Ω |
| Except R | ↑ | 10 kΩ or higher |
| N | 2 - 9 and 4 - 5 | Below 1 Ω |
| Except N | ↑ | 10 kΩ or higher |
| D and 3 | 2 - 7 | Below 1 Ω |
| Except D and 3 | ↑ | 10 kΩ or higher |
| 2 | 2-3 | Below 1 Ω |
| Except 2 | ↑ | 10 kΩ or higher |
| L | 2 - 8 | Below 1 Ω |
| Except L | ↑ | 10 kΩ or higher |