Home › TRANSMISSION ยท U340E AUTOMATIC TRANSAXLE › OIL PUMP

OIL PUMP > REASSEMBLY

for Preparation Click here



1. INSTALL CLUTCH DRUM OIL SEAL RING


C067798
  1. Coat 2 new clutch drum oil seal rings with Toyota Genuine ATF WS, and install them onto the stator shaft.



2. INSTALL FRONT OIL PUMP OIL SEAL


C067799E03
  1. Using SST, install the front oil pump oil seal into the oil pump body.

    SST
    09950-60010   (09951-00550)
    09950-70010   (09951-07100)

    Oil seal drive in depth:
    -0.15 to 0.15 mm (-0.006 to 0.006 in.)



3. INSTALL FRONT OIL PUMP DRIVEN GEAR


D025108E05
  1. Coat the front oil pump driven gear with Toyota Genuine ATF WS, and install it into the oil pump body with the marked side facing upward.



4. INSTALL FRONT OIL PUMP DRIVE GEAR


C082193E04
  1. Coat the front oil pump drive gear with Toyota Genuine ATF WS, and install it into the oil pump body with the marked side facing upward.



5. INSTALL STATOR SHAFT ASSEMBLY


C067789
  1. Using "Torx" socket wrench T30, install the stator shaft assembly with 10 "Torx" screws.

    Torque:
    9.8 N*m{ 100 kgf*cm , 7 ft.*lbf }



6. INSPECT OIL PUMP ASSEMBLY


C067800
  1. Turn the drive gear with 2 screwdrivers and make sure it rotates smoothly.

    NOTICE:
    Do not damage the oil seal lip.



7. INSTALL FRONT OIL PUMP BODY O-RING


C067790
  1. Coat a new front oil pump body O-ring with Toyota Genuine ATF WS, and install it onto the oil pump.