SECOND BRAKE PISTON > DISASSEMBLY |
| 1. REMOVE 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY |
![]() |
Using SST and a press, remove the snap ring from the 2nd brake piston.
Remove the 2nd brake return spring from the 2nd brake cylinder.
![]() |
Remove the 2nd brake piston return spring sub-assembly from the 2nd brake cylinder.
| 2. REMOVE 2ND BRAKE PISTON |
![]() |
Hold the 2nd brake piston and apply compressed air (392 kPa, 4.0 kgf/cm2 , 57 psi) to the 2nd brake cylinder to remove the 2nd brake piston.
| 3. REMOVE 2ND BRAKE CYLINDER O-RING |
![]() |
Using a screwdriver, remove the 2 O-rings from the 2nd brake cylinder.