Home › TRANSMISSION ยท U340E AUTOMATIC TRANSAXLE › SECOND BRAKE PISTON

SECOND BRAKE PISTON > REASSEMBLY

for Preparation Click here



1. INSTALL 2ND BRAKE CYLINDER O-RING


C067864
  1. Coat 2 new 2nd brake cylinder O-rings with Toyota Genuine ATF WS, and install them into the 2nd brake cylinder.

    NOTICE:
    Do not damage the O-rings.



2. INSTALL 2ND BRAKE PISTON


C067866
  1. Coat the 2nd brake piston with Toyota Genuine ATF WS, and install it into the 2nd brake cylinder.

    CAUTION:
    Do not damage the O-rings when pressing the 2nd brake piston into the 2nd brake cylinder by hand.



3. INSTALL 2ND BRAKE PISTON RETURN SPRING SUB-ASSEMBLY


C067862
  1. Install the piston return spring.



    D003796E04
  1. Place SST on the piston return spring, and compress the piston return spring with a press.

  1. Using a screwdriver, install the snap ring.

    NOTICE:
    Make sure that the end gap of the snap ring is not aligned with the piston return spring claw.