Home › TRANSMISSION ยท U340E AUTOMATIC TRANSAXLE › INPUT SHAFT

INPUT SHAFT > INSPECTION

for Preparation Click here



1. INSPECT FRONT CLUTCH CLUTCH DISC


C067852
  1. Check whether the sliding surface of the disc, plate and flange are worn or burnt.
    If necessary, replace them.

    NOTICE:
    1. If the lining of the disc is peeling off or discolored, or even if a part of the printed number is defaced, replace all the discs.
    2. Before assembling new discs, soak them in Toyota Genuine ATF WS for at least 15 minutes.



2. INSPECT FORWARD CLUTCH RETURN SPRING SUB-ASSEMBLY


C067855
  1. Using vernier calipers, measure the free length of the spring together with the spring seat.

    Standard free length:
    21.69 mm (0.8540 in.)