Home › BODY › SEAT › FRONT SEAT ASSEMBLY (for Hatchback)

FRONT SEAT ASSEMBLY (for Hatchback) > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp surfaces on the front seat adjuster frame could cause injuries to your hands.

HINT:
The procedure described below is for the driver side of LHD. Use the same procedure for both the front passenger and driver sides of LHD, unless otherwise specified.



1. REMOVE VERTICAL ADJUSTER COVER (for Driver Side)


    B119873E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the vertical adjuster cover.



2. REMOVE VERTICAL ADJUSTER HANDLE (for Driver Side)


    B119874
  1. Remove the 2 screws and the vertical adjuster handle.



3. REMOVE RECLINING ADJUSTER RELEASE HANDLE


    B114696E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the reclining adjuster release handle.



4. REMOVE FRONT SEAT CUSHION SHIELD LH


    B114697
  1. Remove the screw.

  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and the clip and remove the front seat cushion shield.



5. REMOVE FRONT SEAT INNER BELT ASSEMBLY


    B209777
  1. for Drive Side:

    1. Disengage the 2 hooks and remove the front seat cushion cover.

    2. Remove the buckle switch connector.

    3. Remove the 4 clamps.



    4. B114766
    5. Remove the wire harness from the claw of the front seat cushion shield.

    6. Remove the bolt and the front seat inner belt.



    B209774
  1. for Front Passenger Side:

    1. Disengage the 2 hooks and remove the front seat cushion cover.

    2. Disconnect the occupant detection sensor connector.

    3. Remove the buckle switch connector.

    4. Remove the 5 clamps.



    5. B114762
    6. Remove the wire harness from the claw of the front seat cushion shield.

    7. Remove the bolt and the front seat inner belt.



6. REMOVE FRONT SEAT CUSHION SHIELD RH


    B114698
  1. Remove the screw.

  1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and the clip and remove the front seat cushion shield.



7. REMOVE FRONT SEAT CUSHION COVER PAD


    B119875
  1. Remove the front seatback cover band.



    B114700E02
  1. for Clip Type:

    1. Using a clip remover, remove the 2 clips.

  1. for J Hook Type:

    1. Disengage the 2 hooks.

  1. w/ Front Seat Side Airbag:

    1. Remove the hook tape and the front seat cushion cover pad fixing cover.



    B209763
  1. for Front Passenger side:

    1. Remove the occupant detection sensor connector.

    2. Disengage the 2 claws and the 6 hooks and remove the front seat cushion cover pad.



8. REMOVE FRONT SEAT HEADREST SUPPORT


    B114703
  1. Remove the 3 hog rings as shown in the illustration.



    B114704
  1. Disengage the 2 claws and remove the front seat headrest support.

    HINT:
    Use the same procedure for both sides.



9. REMOVE RECLINING REMOTE CONTROL LEVER (for Walk in Seat Type)


    B121714E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the reclining remote control lever.



10. REMOVE RECLINING REMOTE CONTROL LEVER BEZEL (for Walk in Seat Type)


    B121715
  1. Disengage the 4 claws and remove the reclining remote control lever bezel.



11. REMOVE FRONT SEATBACK COVER PAD


    B114705
  1. Remove the front seatback cover pad.



12. REMOVE FRONT SEAT SIDE AIRBAG ASSEMBLY (w/ Front Seat Side Airbag)


    B119877
  1. Remove the airbag connector and the 3 wire harness clamps.



    B114707
  1. Using a clip remover, remove the 2 wire harness clamps.



    B114708
  1. Remove the 2 nuts and the front seat side airbag.



13. REMOVE VERTICAL ADJUSTER SPACER (for Driver Side)


    B119878
  1. Disengage the claw and remove the vertical adjuster spacer.



14. REMOVE RECLINING ADJUSTER INSIDE COVER LH


    B127699
  1. for Full Memory Type:

    1. Remove the screw.

    2. Disengage the 2 claws and remove the reclining adjuster inside cover.



    B114710
  1. for Normal Type:

    1. Remove the screw.

    2. Disengage the claw and remove the reclining adjuster inside cover.



15. REMOVE RECLINING ADJUSTER INSIDE COVER RH

HINT:
Use the same procedure as for the LH side.



16. REMOVE RECLINING ADJUSTER OUTSIDE COVER LH


    B114709
  1. Remove the screw and the reclining adjuster outside cover.



17. REMOVE RECLINING ADJUSTER OUTSIDE COVER RH

HINT:
Use the same procedure as for the LH side.



18. REMOVE FRONT SEAT CUSHION LOWER SHIELD LH


    B127735
  1. for 6 Way Type:

    1. Remove the screw.

    2. Disengage the claw and remove the front seat cushion lower shield.



    B127737
  1. for 4 Way Type:

    1. Remove the screw.

    2. Disengage the claw and remove the front seat cushion lower shield.



19. REMOVE FRONT SEAT CUSHION LOWER SHIELD RH


    B127734
  1. for 6 Way Type:

    1. Remove the screw.

    2. Disengage the 2 claws and remove the front seat cushion lower shield.



    B127736
  1. for 4 Way Type:

    1. Remove the screw.

    2. Disengage the claw and remove the front seat cushion lower shield.