Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Hatchback RH Side)

REAR SEAT ASSEMBLY (for Hatchback RH Side) > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp surfaces on the rear seat cushion frame and the rear seatback frame could cause injuries to your hands.



1. REMOVE REAR SEAT INNER BELT ASSEMBLY


    B114643E01
  1. Remove the belt from the band.

  1. Remove the bolt and the rear seat inner belt.



2. REMOVE REAR SEAT SIDE HINGE COVER


B119886

HINT:
Use the same procedure as for the opposite side.

  1. Disengage the 4 claws and remove the rear seat side hinge cover.



3. REMOVE REAR SEAT CUSHION ASSEMBLY


    B119887
  1. Using "TORX" socket wrench T45, remove the 2 bolts, the 2 spacers and the rear seat cushion.



4. REMOVE REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY


    B119888
  1. Remove the 4 hog rings.

  1. Disengage the 7 hooks and remove the rear seat cushion cover pad.



5. REMOVE REAR SEAT HEADREST ASSEMBLY


    B108395E01
  1. Push in the lock button of the rear seat headrest support and remove the rear seat headrest.



6. REMOVE REAR SEAT LOCK STRIKER COVER


    B119889E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the rear seat lock striker cover.



7. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY


    B126920
  1. Remove the 2 screws.

  1. Disconnect the rear seat reclining control cable and the rear seat slide control cable and remove the rear seat lock control lever.



8. REMOVE REAR SEAT HEADREST SUPPORT


    B126926
  1. w/ Tether Anchor Cover:

    1. Disengage the 2 claws and open the cover.



    2. B126927
    3. Remove the screw and the tether anchor cover.



    B119890
  1. Remove the rear seatback cover band.



    B119891
  1. Remove the 5 hog rings.



    B119892
  1. Unfasten the 2 zippers.



    B114669
  1. Disengage the 2 claws and remove the rear seat headrest support.

    HINT:
    Use the same procedure for both sides.



9. REMOVE REAR SEATBACK COVER PAD SUB-ASSEMBLY


    B114670
  1. Remove the rear seatback cover pad.



10. REMOVE REAR SEAT UNDER TRAY COVER


    B114671
  1. Using a clip remover, remove the 4 clips and the rear seat under tray cover.



11. REMOVE REAR SEAT RECLINING OUTSIDE COVER LH


    B108405
  1. Remove the screw and the rear seat reclining outside cover.



12. REMOVE REAR SEAT RECLINING OUTSIDE COVER RH


    B108404
  1. Remove the screw and the rear seat reclining outside cover.



13. REMOVE REAR SEAT RECLINING INSIDE COVER LH


    B114672
  1. Disengage the 2 claws and remove the rear seat reclining inside cover.



14. REMOVE REAR SEAT RECLINING INSIDE COVER RH


    B114673
  1. Disengage the 2 claws and remove the rear seat reclining inside cover.



15. REMOVE RECLINING ADJUSTER INSIDE COVER


    B114674
  1. Remove the screw.

  1. Disengage the claw and remove the reclining adjuster inside cover.



16. REMOVE REAR SEAT RECLINING CONTROL CABLE


    B114675
  1. Remove the rear seat reclining control cable.



17. REMOVE REAR SEAT SLIDE CONTROL CABLE


    B114676
  1. Remove the rear seat slide control cable.



    B114677
  1. Remove the 3 clips.



18. REMOVE REAR SEAT TRACK ASSEMBLY LH


    B114679
  1. Remove the 2 nuts and the rear seat track.



19. REMOVE REAR SEAT TRACK ASSEMBLY RH


    B114678
  1. Remove the 2 nuts and the rear seat track.