Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Hatchback RH Side)

REAR SEAT ASSEMBLY (for Hatchback RH Side) > REASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp surfaces on the rear seat cushion frame and the rear seatback frame could cause injuries to your hands.



1. INSTALL REAR SEAT TRACK ASSEMBLY LH


    B114679
  1. Install the rear seat track with the 2 nuts.

    Torque:
    33 N*m{ 335 kgf*cm , 24 ft.*lbf }



2. INSTALL REAR SEAT TRACK ASSEMBLY RH


    B114678
  1. Install the rear seat track with the 2 nuts.

    Torque:
    33 N*m{ 335 kgf*cm , 24 ft.*lbf }



3. INSTALL REAR SEAT SLIDE CONTROL CABLE


    B114677
  1. Install the 3 clips.



    B127712E01
  1. Install the rear seat slide control cable as shown in the illustration.



4. INSTALL REAR SEAT RECLINING CONTROL CABLE


    B127711E01
  1. Install the rear seat reclining control cable as shown in the illustration.



5. INSTALL RECLINING ADJUSTER INSIDE COVER


    B114674
  1. Engage the claw and install the reclining adjuster inside cover.

  1. Tighten the screw.



6. INSTALL REAR SEAT RECLINING INSIDE COVER LH


    B114672
  1. Engage the 2 claws and install the rear seat reclining inside cover.



7. INSTALL REAR SEAT RECLINING INSIDE COVER RH


    B114673
  1. Engage the 2 claws and install the rear seat reclining inside cover.



8. INSTALL REAR SEAT RECLINING OUTSIDE COVER RH


    B108404
  1. Install the rear seat reclining outside cover with the screw.



9. INSTALL REAR SEAT RECLINING OUTSIDE COVER LH


    B108405
  1. Install the rear seat reclining outside cover with the screw.



10. INSTALL REAR SEAT UNDER TRAY COVER


    B114671
  1. Install the rear seat under tray cover with the 4 clips.



11. INSTALL REAR SEATBACK COVER PAD SUB-ASSEMBLY


    B114670
  1. Install the rear seatback cover pad.



    B119892
  1. Fasten the 2 zippers.



    B114680E01
  1. Using hog ring pliers, install 5 new hog rings.



    B119890
  1. Install the rear seatback band.



    B126927
  1. w/ Tether Anchor Cover:

    1. Install the tether anchor cover with the screw.



    2. B126926
    3. Engage the 2 claws and close the cover.



12. INSTALL REAR SEAT HEADREST SUPPORT


B114681E03

HINT:
Use the same procedure for both sides.

  1. Align the protruding portion of the rear seat headrest support with the installation groove of the rear seatback frame.

  1. Engage the 2 claws and install the rear seat headrest support.



13. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY


    B126920
  1. Connect the rear seat reclining control cable and the rear seat slide control cable, and then install the rear seat lock control lever.

  1. Tighten the 2 screws.



14. INSTALL REAR SEAT LOCK STRIKER COVER


    B114682
  1. Engage the 2 claws and install the rear seat lock striker cover.



15. INSTALL REAR SEAT HEADREST ASSEMBLY


    B108395E01
  1. Push in the lock button of the rear seat headrest support and install the rear seat headrest.



16. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY


    B114683E01
  1. Engage the 7 hooks and install the rear seat cushion cover pad.

  1. Using hog ring pliers, install 4 new hog rings.



17. INSTALL REAR SEAT CUSHION ASSEMBLY


    B119887
  1. Install the bolts into the spacers.

  1. Using "TORX" socket wrench T45, install the rear seat cushion with the 2 bolts.

    Torque:
    21 N*m{ 215 kgf*cm , 16 ft.*lbf }



18. INSTALL REAR SEAT SIDE HINGE COVER


B119886

HINT:
Use the same procedure as for the opposite side.

  1. Engage the 4 claws and install the rear seat side hinge cover.



19. INSTALL REAR SEAT INNER BELT ASSEMBLY


    B114644E01
  1. Install the rear seat inner belt with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not place the anchor plate over the convex areas of the rear seat back frame.