Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Hatchback LH Side)

REAR SEAT ASSEMBLY (for Hatchback LH Side) > INSTALLATION

for Preparation Click here


NOTICE:
Always use "TORX" socket wrench E10 when installing the rear seat.



1. INSTALL REAR SEAT ASSEMBLY


    B126922E01
  1. Insert the 2 location pins through the 2 body holes and install the rear seat.

  1. Using "TORX" socket wrench E10, install the 4 bolts in the sequence shown in the illustration.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }



    B114740E01
  1. Install the rear seat cushion.

  1. Using "TORX" socket wrench E10, install the 3 bolts in the sequence shown in the illustration.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }



2. INSTALL NO. 2 REAR SEAT LEG COVER


    B114739
  1. Engage the 3 claws and install the No. 2 rear seat leg cover.



3. INSTALL NO. 1 REAR SEAT LEG COVER


    B114738
  1. Engage the 4 claws and install the No. 1 rear seat leg cover.



4. INSTALL DECK FLOOR BOX (w/ Deck Board)


    B106445
  1. Install the deck floor box and lock the 2 knobs.



5. INSTALL SPARE WHEEL COVER ASSEMBLY (w/ Deck Board)


    B119913
  1. Install the spare wheel cover.



6. INSTALL DECK BOARD SUB-ASSEMBLY (w/ Deck Board)


    B106447
  1. Set the deck board and lock the 2 knobs.



7. INSTALL REAR FLOOR CARPET ASSEMBLY (w/o Deck Board)


    B119912
  1. Install the rear floor carpet.



8. INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)


    B114569E01
  1. Engage the 2 claws and install the package tray trim panel.

  1. Install the 5 pieces of hook tape.

  1. Install the 2 package tray trim suspenders.