Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Hatchback LH Side)

REAR SEAT ASSEMBLY (for Hatchback LH Side) > REMOVAL

for Preparation Click here


NOTICE:
Always use "TORX" socket wrench E10 when removing the rear seat.



1. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Package Tray Trim)


    B114569E01
  1. Remove the 2 package tray trim suspenders.

  1. Remove the 5 pieces of hook tape.

  1. Disengage the 2 claws and remove the package tray trim.



2. REMOVE DECK BOARD SUB-ASSEMBLY (w/ Deck Board)


    B106371
  1. Release the 2 knobs and remove the deck board.



3. REMOVE SPARE WHEEL COVER ASSEMBLY (w/ Deck Board)


    B119913
  1. Remove the spare wheel cover.



4. REMOVE DECK FLOOR BOX (w/ Deck Board)


    B106373
  1. Release the 2 knobs and remove the deck floor box.



5. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Deck Board)


    B119912
  1. Remove the rear floor carpet.



6. REMOVE NO. 1 REAR SEAT LEG COVER


    B126919E01
  1. Disengage the 4 claws in the sequence shown in the illustration and remove the No. 1 rear seat leg cover.



7. REMOVE NO. 2 REAR SEAT LEG COVER


    B126921E01
  1. Disengage the 3 claws in the sequence shown in the illustration and remove the No. 1 rear seat leg cover.



8. REMOVE REAR SEAT ASSEMBLY


    B114740
  1. Using "TORX" socket wrench E10, remove the 3 bolts and pull up the rear seat cushion.



    B117760
  1. Using "TORX" socket wrench E10, remove the 4 bolts and the rear seat.