Home › BODY › SEAT › REAR SEAT ASSEMBLY (for Hatchback LH Side)

REAR SEAT ASSEMBLY (for Hatchback LH Side) > REASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp surfaces on the rear seat cushion frame and the rear seatback frame could cause injuries to your hands.



1. INSTALL REAR SEAT TRACK ASSEMBLY LH


    B114757
  1. Install the rear seat track with the 2 nuts.

    Torque:
    33 N*m{ 335 kgf*cm , 24 ft.*lbf }



2. INSTALL REAR SEAT TRACK ASSEMBLY RH


    B114756
  1. Install the rear seat track with the 3 nuts.

    Torque:
    33 N*m{ 335 kgf*cm , 24 ft.*lbf }



3. INSTALL REAR SEAT SLIDE CONTROL CABLE


    B114755
  1. Install the 4 clips.



    B127715E01
  1. Install the rear seat slide control cable as shown in the illustration.



4. INSTALL REAR SEAT RECLINING CONTROL CABLE


    B127714E01
  1. Install the rear seat reclining control cable as shown in the illustration.



5. INSTALL RECLINING ADJUSTER INSIDE COVER LH


    B114752
  1. Engage the claw and install the reclining adjuster inside cover.

  1. Tighten the screw.



6. INSTALL RECLINING ADJUSTER INSIDE COVER RH

HINT:
Use the same procedure as for the LH side.



7. INSTALL REAR SEAT RECLINING INSIDE COVER


    B117767
  1. Engage the 2 claws and install the rear seat reclining inside cover.



8. INSTALL REAR SEAT RECLINING OUTSIDE COVER LH


    B117766
  1. Install the rear seat reclining outside cover with the screw.



9. INSTALL REAR SEAT RECLINING OUTSIDE COVER RH


    B117765
  1. Install the rear seat reclining outside cover with the 2 screws.



10. INSTALL REAR SEAT UNDER TRAY COVER


    B114751
  1. Install the rear seat under tray cover with the 6 clips.



11. INSTALL REAR SEATBACK COVER PAD SUB-ASSEMBLY


    B114750
  1. Install the rear seatback cover pad.



    B127656
  1. for 3 Point Type Rear Center Seat Belt:

    1. Install the rear seat belt hook with the bolt.

      Torque:
      5.0 N*m{ 50 kgf*cm , 44 in.*lbf }

  1. Fasten the 2 zippers.



    B114747E02
  1. Using hog ring pliers, install 7 new hog rings.



    B114745
  1. Install the 2 rear seatback bands.



    B126925
  1. w/ Tether Anchor Cover:

    HINT:
    Use the same procedure for both sides.


    1. Install the tether anchor covers with the screw.



    2. B126924
    3. Engage the 2 claws and close the cover.



12. INSTALL REAR SEAT HEADREST SUPPORT


    B114749E03
  1. Align the protruding portion of the rear seat headrest support with the installation groove of the rear seatback frame.

  1. w/ Rear Center Seat Headrest:

    HINT:
    Use the same procedure to install all the rear seat headrest supports.


    1. Engage the 2 claws and install the rear seat headrest support.

  1. w/o Rear Center Seat Headrest:

    HINT:
    Use the same procedure to install all the rear seat headrest supports.


    1. Engage the 2 claws and install the rear seat headrest support.



13. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY


    B117764
  1. Connect the rear seat reclining control cable and the rear seat slide control cable, and then install the rear seat lock control lever.

  1. Tighten the 2 screws.



14. INSTALL REAR SEAT LOCK STRIKER COVER


    B117768
  1. Engage the 2 claws and install the rear seat lock striker cover.



15. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY (w/ Rear Center Seat Headrest)


    B114744E01
  1. Push in the lock button of the rear seat headrest support and install the rear center seat headrest.



16. INSTALL REAR SEAT HEADREST ASSEMBLY


    B117762E01
  1. Push in the lock button of the rear seat headrest support and install the rear seat headrest.



17. INSTALL REAR SEAT CUSHION COVER PAD SUB-ASSEMBLY


    B114743E01
  1. Engage the 7 hooks and install the rear seat cushion cover pad.

  1. Using hog ring pliers, install 7 new hog rings.



18. INSTALL REAR SEAT CUSHION ASSEMBLY


    B114741
  1. Install the rear seat cushion with the 2 nuts.

    Torque:
    20 N*m{ 205 kgf*cm , 15 ft.*lbf }

  1. Install the spacer into the bolt.

  1. Using "TORX" socket wrench T45, tighten the bolt.

    Torque:
    21 N*m{ 215 kgf*cm , 16 ft.*lbf }



19. INSTALL REAR SEAT SIDE HINGE COVER


    B117761
  1. Engage the 4 claws and install the rear seat side hinge cover.



20. INSTALL REAR SEAT INNER BELT ASSEMBLY


    B114648E01
  1. Install the rear seat inner belt with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not place the anchor plate over the convex area of the rear seat back frame.

  1. Install the belt into the band.



21. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY LH


    B114652E01
  1. Install the rear seat inner belt with the bolt.

    Torque:
    42 N*m{ 430 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not place the anchor plate over the convex areas of the rear seat back frame.

  1. Install the belt into the band.



22. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY RH


    B114655E01
  1. for 3 Point type Rear Center Seat Belt:

    1. Install the rear center seat inner belt with the bolt.

      Torque:
      42 N*m{ 430 kgf*cm , 31 ft.*lbf }

      NOTICE:
      Do not place the anchor plate over the convex area of the rear seat back frame.



    B117736E01
  1. for 2 Point type Rear Center Seat Belt:

    1. Install the rear center seat inner belt with the bolt.

      Torque:
      42 N*m{ 430 kgf*cm , 31 ft.*lbf }

      NOTICE:
      Do not place the anchor plate over the convex area of the rear seat frame adjuster.

  1. Install the tongue plate.