Home › BODY ELECTRICAL › AUDIO / VISUAL › REAR PACKAGE TRAY SPEAKER (for Sedan)

REAR PACKAGE TRAY SPEAKER (for Sedan) > ON-VEHICLE INSPECTION

for Preparation Click here



1. REAR SPEAKER ASSEMBLY

HINT:
Remove interior parts so that the rear speaker can be seen.

  1. Check the installation.

    OK:
    The speaker is securely installed.

    If the result is not as specified, reinstall the rear speaker.

  1. Visually check the speaker.

    OK:
    The cone paper of the speaker is not torn.

    If the result is not as specified, replace the rear speaker.



    B134976E01
  1. Check the resistance.

    1. Disconnect the speaker connector.

    2. Using an ohmmeter, measure the resistance between the terminals.

      Standard resistance:
      Tester Connection
      Specified Condition
      1 - 2
      Approximately 4 Ω

      If the result is not as specified, replace the rear speaker.