Home › HEATER & AIR CONDITIONING SYSTEM › AIR CONDITIONING › BLOWER MOTOR

BLOWER MOTOR > INSPECTION

for Preparation Click here



1. INSPECT BLOWER MOTOR


    I101231E01
  1. Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1, then check that the motor operates smoothly.

    OK:
    The motor operates smoothly.

    If the operation is not as specified, replace the blower motor.

  1. Measure the current.

    Standard current:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Blower motor operates
    1 to 3 A

    If the current value is not as specified, replace the blower motor.