Terminals No. (Symbol)
| Wiring Color
| Terminal Description
| Condition
| Specified Condition
|
A19-1 (PIG) - A19-2 (PGND)
| W - W-B
| EPS fuse
| Always
| 11 to 14 V
|
A19-2 (PGND) - Body ground
| W-B - Body ground
| Body ground
| Always
| Below 1 Ω
|
b1-1 (M1) - A19-2 (PGND)
| R - W-B
| Power steering motor
| - Ignition switch ON
- Turn steering wheel to left
| 11 to 14 V (LHD) Below 1 V (RHD)
|
- Ignition switch ON
- Turn steering wheel to right
| Below 1 V (LHD) 11 to 14 V (RHD)
|
b1-2 (M2) - A19-2 (PGND)
| B - W-B
| Power steering motor
| - Ignition switch ON
- Turn steering wheel to left
| Below 1 V (LHD) 11 to 14 V (RHD)
|
- Ignition switch ON
- Turn steering wheel to right
| 11 to 14 V (LHD) Below 1 V (RHD)
|
D31-1 (CANH) - D31-7 (CANL)
| SB - W
| CAN BUS
| Ignition switch off
| 108 to 132 Ω
|
D31-2 (SIL) - A19-2 (PGND)
| P - W-B
| DLC3
| Communication established by connecting intelligent tester to DLC3
| Pulse generation (See waveform 1)
|
D31-6 (IG) - A19-2 (PGND)
| L- W-B
| ECU-IG fuse
| Ignition switch ON
| 11 to 14 V
|
D31-11 (TS) - A19-2 (PGND)
| LG - W-B
| DLC3
| Ignition switch ON
| 11 to 14 V
|
D31-5 (SPD) - A19-2 (PGND) *
| R - W-B
| Speed signal
| Ignition switch ON
| Pulse generation (See waveform 2)
|
c1-5 (TRQ1) - A19-2 (PGND)
| W - W-B
| Torque sensor
| - Ignition switch ON
- Turn steering wheel to left and right
| 0.3 to 4.7 V
|
c1-6 (TRQV) - A19-2 (PGND)
| R - W-B
| Torque sensor
| Ignition switch ON
| 7.5 to 8.5 V
|
c1-7 (TRQ2) - A19-2 (PGND)
| Y - W-B
| Torque sensor
| - Ignition switch ON
- Turn steering wheel to left and right
| 0.3 to 4.7 V
|
c1-8 (TRQG) - A19-2 (PGND)
| B - W-B
| Torque sensor
| Always
| Below 1 Ω
|