BRAKE ACTUATOR (for Hatchback) > REMOVAL |
| 1. DRAIN BRAKE FLUID |
| 2. REMOVE BATTERY |
| 3. REMOVE BATTERY TRAY |
| 4. REMOVE BATTERY CARRIER |
| 5. REMOVE BRAKE ACTUATOR (for LHD) |
![]() |
Release the lock lever and disconnect the brake actuator connector.
![]() |
Using a union nut wrench (10 mm), separate the brake tube from the front flexible hose.
![]() |
Using a union nut wrench (10 mm), separate the 2 brake tubes from the brake tube No. 1 way.
![]() |
Using a union nut wrench (10 mm), separate the 2 brake tubes from the brake master cylinder.
![]() |
Using a union nut wrench (10 mm), separate the 6 brake tubes from the brake actuator.
![]() |
Use tags or labels to identify the place to reconnect each brake tube.
| *1 | To Front Wheel RH |
| *2 | To Front Wheel LH |
| *3 | To Rear Wheel RH |
| *4 | To Rear Wheel LH |
| *5 | From Master Cylinder |
| *6 | From Master Cylinder |
![]() |
Disconnect the brake tube clamp.
![]() |
Remove the 3 bolts and the actuator with bracket.
| 6. REMOVE BRAKE ACTUATOR (for RHD with VSC) |
![]() |
Release the lock lever and disconnect the brake actuator connector.
![]() |
Using a union nut wrench (10 mm), separate the 6 brake tubes from the brake actuator.
![]() |
Use tags or labels to identify the place to reconnect each brake tube.
| *1 | To Front Wheel RH |
| *2 | To Front Wheel LH |
| *3 | To Rear Wheel RH |
| *4 | To Rear Wheel LH |
| *5 | From Master Cylinder |
| *6 | From Master Cylinder |
![]() |
Remove the 3 bolts and brake actuator with bracket.
| 7. REMOVE BRAKE ACTUATOR (for RHD without VSC) |
![]() |
Release the lock lever and disconnect the brake actuator connector.
![]() |
Using a union nut wrench (10 mm), separate the 6 brake tubes from the brake actuator.
![]() |
Use tags or labels to identify the place to reconnect each brake tube.
| *1 | To Front Wheel RH |
| *2 | To Front Wheel LH |
| *3 | To Rear Wheel RH |
| *4 | To Rear Wheel LH |
| *5 | From Master Cylinder |
| *6 | From Master Cylinder |
![]() |
Remove the 3 bolts and the actuator with bracket.
| 8. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY (for LHD) |
![]() |
Remove the 3 bolts and the actuator bracket.
| 9. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY (for RHD with VSC) |
![]() |
Remove the 4 bolts and the actuator bracket.
| 10. REMOVE BRAKE ACTUATOR BRACKET ASSEMBLY (for RHD without VSC) |
![]() |
Remove the 3 bolts and the actuator bracket.