YAW RATE AND ACCELERATION SENSOR (for Sedan) > INSTALLATION |
| 1. INSTALL YAW RATE AND ACCELERATION SENSOR |
Connect the yaw rate and acceleration sensor connector.
Install the yaw rate and acceleration sensor with the 2 bolts.
| 2. INSTALL REAR CONSOLE BOX ASSEMBLY |
![]() |
Engage the 4 claws and install the rear console box.
Install the 2 bolts and 2 screws.
Connect the clamp.
| 3. INSTALL CONSOLE BOX CARPET |
![]() |
Install the console box carpet.
| 4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Connect the connector.
Engage the 3 clips and 3 claws and install the console upper rear panel.
| 5. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Engage the 5 clips and the claw and install the upper console panel.
| 6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY |
| 7. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL |
![]() |
Engage the 2 claws and 2 clips and install the instrument panel finish panel lower center.
| 8. PERFORM YAW RATE AND ACCELERATION SENSOR ZERO POINT CALIBRATION |
| 9. CHECK VSC SENSOR SIGNAL |